高炉煤气燃烧器

高炉煤气燃烧器

高炉煤气燃烧器

Blast furnace gas low NOx burner

详情信息

1、 应用场合:

1)  广泛用于钢铁、冶金企业等需要燃烧高炉煤气的应用场合,可以与配套的热风炉、烟道内燃烧器、对冲燃烧器、加热炉高炉煤气烧嘴等使用。每一台低热值高炉煤气烧嘴都按照现场量体裁衣设计。

1. Applications:

1) The products are widely used in iron and steel, metallurgical enterprises and other applications that need to burn blast furnace gas. It can be used with hot blast stoves, flue burners, offset burners, furnace gas burners, etc. Each low calorific value blast furnace gas burner is custom designed.

2、 高炉煤气低氮烧嘴特点:

1) 高炉煤气与空气混合均匀、燃烧完全,燃烧效率在99.9%以上;

2) 可以采用等离子点火器直接点燃,不受气候影响。

3) 不受压力影响、无论正压还是负压均可实现正常燃烧;

4) 火焰刚性强、燃烧稳定、不脱火、不回火、不飘火;

5) 燃气瞬间发生波动时,燃烧器仍然能正常燃烧,不断火;

6) 高炉煤气压力适应范围大:2KPa—50KPa;

7) 每一台高炉煤气烧嘴都按照用户要求,量体裁衣设计

8) 工况适应性广:强正压、强负压、无氧、高温等;

9) 实现低氮氧化物燃烧,NOx排放浓度≤30mg/Nm3

2. Product features:

1) The blast furnace gas and air are mixed evenly and burned completely, with the combustion efficiency above 99.9%;

2) Adopt plasma igniter for direct ignition, which is not affected by climate.

3) The product is not affected by furnace pressure. No matter positive pressure or negative pressure, the product can be normal combustion;

4) Strong flame rigidity and stable combustion.

5) When the gas fluctuates instantaneously, the burner can still burn normally;

6) Blast furnace gas pressure to adapt to a large range: 2KPa - 50KPa;

7) Each burner is custom-designed according to user requirements

8) Wide adaptability of working conditions: strong positive pressure, strong negative pressure, no oxygen, high temperature, etc.;

9) Realize low NOx combustion, NOx emission concentration ≤30mg/Nm3

  • · 新型燃烧技术
  • · 国际大厂级别工业设计
  • · 高精密数控车加工中心
  • · 自动精密加工焊接
  • · 氮氧化物排放量控制在低于60-150mg/Nm3
公司名称:北京神科博斯热能工程技术有限公司
公司地址:北京市通州区潞城镇崔家楼村197号
联系电话:13901370274
公司邮箱:skbswhc@163.com
  • Copyright 2021 北京神科博斯热能工程技术有限公司 版权所有   
    备案号:京ICP备20023942号              技术支持:逸网恒信