1、应用场合：

1)  广泛用于：工业窑炉、锅炉、化工废气、焦化厂、钢厂尾气等各种需要进行点火的场所，可以与配套的：高炉煤气燃烧器、转炉煤气燃烧器、煤粉燃烧器、发生炉煤气燃烧器、天然气燃烧器、柴油燃烧器、重油燃烧器、渣油燃烧器、低热值气体燃烧器使用。

1. Applications:

1) Widely used in industrial kilns, boilers, chemical waste gas, coking plant, steel mill exhaust gas and other places that need to be ignited. The product can be used with blast furnace gas burner, converter gas burner, pulverized coal burner, generator gas burner, natural gas burner, diesel burner, heavy oil burner, residual oil burner, low calorific value gas burner.

2、产品特点：

1) 输入电压220V、激励电压10KV、维持电压10KV；

2) 防爆，24小时工作，功率<0.6-50KW（按照气体成分配置）;

3) 点火杆前端选用高温合金材料，耐温 1300℃ ；

4) 点火电缆可以根据用户要求定制，最长可达800米；

5) 点火枪长度按照用户要求设计

6) 防爆等级：ExdIIBT4（根据用户要求设计）

2. Product features:

1) Input voltage: 220V, excitation voltage: 10kV, maintenance voltage: 10kV;

2) Explosion-proof, 24 hours working, power <0.6-50KW (according to gas composition configuration);

3) The front end of the ignition rod is made of high temperature alloy material with a temperature resistance of 1300℃;

4) Ignition cable can be customized according to user requirements, up to 800 meters;

5) The length of the ignition gun is designed for user requirements.

6) Explosion-proof grade: ExdIIBT4 (designed for user requirements)

1、应用场合：

1) 广泛应用于各类碳氢类火焰的检测，可作为：高炉煤气火焰检测器、转炉煤气火焰检测器、发生炉煤气火焰检测器、天然气火焰检测器、柴油火焰检测器、低热值气体火焰检测器。

1. Applications:

1) Widely used in the detection of all kinds of hydrocarbon flame. Products include: blast furnace gas flame detector, converter gas flame detector, generator gas flame detector, natural gas flame detector, diesel flame detector, low calorific value gas flame detector.

2、产品特点：

1)  电源电压：220VAC/24VDC；

2)  光谱范围：紫外：160-260nm、250-400nm，红外：2.2um 左右；

3)  峰值波长：紫外：210±5nm，360±5nm，红外：2.2um；

4)  响应时间：80ms；

5)  输出信号：继电器干接点信号30VDC/1A、220VAC/0.3A，模拟量信号4~20 mA；

6)  视角范围：15℃（炉膛）45 º（火炬）120 º（火灾）；

7)  环境温度：-40～+70℃。

2. Product features:

1) Power supply voltage: 220VAC/24VDC;

2) Spectral range: UV: 160-260nm, 250-400nm, infrared: about 2.2um;

3) Peak wavelength: UV: 210±5nm, 360±5nm, infrared: 2.2um;

4) Response time: 80ms;

5) Output signal: relay dry contact signal 30VDC/1A, 220VAC/0.3A, analog signal 4~20 mA;

6) Angle of view: 15 ° (furnace) 45 ° (torch) 120 ° (fire);

7) Ambient temperature: -40 ~ +70℃.

1、应用场合：

1)采用电动推进方式，点火枪电动推进器、油枪电动推进器、锅炉点火电动推进器、脱销喷枪电动推进器、水煤浆枪电动推进器、燃烧机电动推进器，自动推进装置广泛应用于：脱硝喷枪、锅炉油枪点火、窑炉点火等设备中。

1. Applications:

1) Adopt electric propulsion mode. Products include: electric propellers for ignition gun, electric propellers for oil gun, electric propellers for boiler ignition, electric propellers for off-sale spray gun, electric propellers for coal water slurry gun and electric propellers for combustion. Widely used in: denitrification spray gun, boiler oil gun ignition, furnace ignition and other equipment.

2、技术参数：

1) 推进器行程：200mm-1000mm（根据用户要求设计）

2) 推进器电机电源：380v/220v

3)功率：180w-7.5kw 

4) 可推进重量：55kg-1000kg（根据用户要求设计）

5)防护等级：IP65

6)防爆等级：ExdIIBT4（根据用户要求设计）

7)行程时间约：8s-30s（根据用户要求设计）

8) 环境温度：-30-70℃

9)喷枪直径：Φ18-Φ600（根据用户要求设计）

10) 行程开关电源24V

11)电源接入方法：直接接入

2. Technical parameters:

1) Thruster stroke: 200mm-1000mm (designed for user requirements)

2) Power supply of propeller motor: 380V / 220V

3) Power: 180W-7.5KW

4) Pushing weight: 55Kg-1000Kg (designed for user requirements)

5) Protection grade: IP65

6) Explosion-proof grade: ExdIIBT4 (designed for user requirements)

7) Trip time: 8S-30s (designed for user requirements)

8) Ambient temperature: -30-70℃

9) Spray gun diameter: Φ18-Φ600 (designed for user requirements)

10) Stroke switching power supply: 24V

11) Power access: direct access

1、应用场合

1)高能点火成套装置由高能点器箱、电缆、导电杆、半导体电嘴几部分组成。主要用于：工业窑炉、锅炉、化工废气、焦化厂、钢厂尾气等各种需要进行点火的场所，可以作为：高炉煤气点火器、转炉煤气点火器、煤粉点火器、发生炉煤气点火器、天然气点火器、柴油点火器、重油点火器、渣油点火器、低热值气体点火器使用。

1. Application

1) The complete set of high energy ignition device is composed of high energy point box, cable, conducting rod and semiconductor nozzle. Mainly used in: industrial kiln, boiler, chemical waste gas, coking plant, steel mill exhaust gas, etc. Products include: blast furnace gas igniter, converter gas igniter, pulverized coal igniter, furnace gas igniter, natural gas igniter, diesel igniter, heavy oil igniter, residue igniter, low calorific value gas igniter.

2、技术参数

1) 单次储能：40焦耳，70焦耳

2) 火花频率：10次/秒

3) 工作时间：15s-60s/次

4) 工作电压：220V

5) 使用环境：温度：-40℃-+70℃

6) 耐温：1000℃

7) 点火枪直径：Φ12-Φ18（根据用户要求设计）

8) 点火枪长度：50mm-15000mm（根据用户要求设计）

9) 重   量：10Kg/20 Kg

2. Technical parameters

1) Single storage: 40 joules, 70 joules

2) Spark frequency: 10 times/second

3) Working time: 15-60s/time

4) Working voltage: 220V

5) Use environment: temperature: -40℃-+70℃

6) Temperature resistance: 1000℃

7) Ignition gun diameter: Φ12- 18 (designed for user requirements)

8) Length of ignition gun: 50mm-15000mm (designed for user requirements)

9) Weight: 10kg/ 20kg

1、设计原理：

1)油枪采用了一种全新的雾化技术—气泡雾化技术，利用流体力学的“两相流”理论，将低压雾化介质（蒸汽或压缩空气）注入到低压油里面，在一混合腔内混合，形成油包气的特定流态－气泡油，利用气泡的产生、运动、变形，直至在枪头出口处形成气泡内外压力差，通过其压差使气泡涨裂来雾化。

1. Design Principle:

1) Fuel nozzle adopts a new atomization technology - bubble atomization technology. Using the two-phase flow theory, the low pressure atomizing medium (steam or compressed air) is injected into the low pressure oil. Mixing in the mixing chamber to form a specific flow pattern of oil and gas - bubble oil. By using the generation, movement and deformation of the bubble, the pressure difference between inside and outside the bubble is formed at the exit of the gun head, and the gas is inflated and cracked through the pressure difference to atomize.

2、应用场合：

1) 独特新颖的喷油嘴结构燃烧各种液体燃料，可以作为：柴油油枪、重油油枪、渣油油枪、奥里油油枪、原油油枪、樟脑油油枪、废油油枪、废液喷枪、废机油油枪、煤焦油油枪、液体燃料喷火嘴、火嘴、油嘴使用。

2. Applications:

1) The unique and novel nozzle structure can burn all kinds of liquid fuels. For example: diesel oil, heavy oil, residual oil, Ori oil, crude oil, camphor oil, waste oil, waste liquid, waste oil, coal tar, liquid fuel, etc.

3、产品特点：

1) 液雾颗粒度小（SMD<45mm），尺寸分布均匀（尺寸分布指数N>2）。

2) 介质粘度使用范围<70E°，重渣油需加热到85℃以上。

3) 雾化耗气量少，ALR<0.1。

4) 火焰刚性强，火焰喷射速度高，解决了喷嘴堵塞、结焦问题。

3. Product features:

1) Small particle size of liquid mist (SMD<45mm), uniform size distribution (size distribution index N>2).

2) Viscosity range of the medium is <70E°, and the heavy residue needs to be heated to 85℃.

3) Low consumption of atomizing medium, ALR<0.1.

4) Strong flame rigidity, high flame jet speed, solve the nozzle blockage, coking problems.

4、技术参数：

1) 燃油流量：2kg/h- 7000kg/h（根据用户要求设计）

2) 燃油压力：0.2-1.0MPa

3) 蒸汽雾化介质压力：0.2-1.0MPa

4) 油枪直径：Φ22-Φ76（根据用户要求设计）

5) 油枪长度：100mm-15000mm（根据用户要求设计）

6) 火焰夹角：10-120度（根据用户要求设计）

4. Technical parameters:

1) Fuel flow: 2kg/ h-7000kg /h (designed for user requirements)

2) Fuel pressure: 0.2-1.0MPa

3) Steam atomization medium pressure: 0.2-1.0MPa

4) Diameter of fuel nozzle: Φ22-Φ76 (designed for user requirements)

5) Length of fuel nozzle: 100mm-15000mm (designed for user requirements)

6) Angle of flame: 10-120 degrees (designed for user requirements)

1、 应用场合：

1) 广泛应用于有色冶金：阳极炉、保温炉、NGL炉、转炉，钢铁行业的加热炉、退火炉、回转窑、均热炉，玻璃行业熔化炉等领域应用。可作为：天然气富氧烧嘴、煤气富氧烧嘴、燃油富氧烧嘴、煤粉富氧烧嘴

1. Applications:

1) The equipment is widely used in non-ferrous metallurgy, including anode furnace, holding furnace, NGL furnace, converter, heating furnace, annealing furnace, rotary kiln, soaking furnace, melting furnace in glass industry, etc. It can be used as natural gas oxygen-rich burner, gas oxygen-rich burner, fuel oil oxygen-rich burner, pulverized coal oxygen-rich burner.

2、 产品特点：

1) 燃烧效率高、节能、热效率高；

2) 火焰温度高、火焰辐射能力强；

3) 燃烧速度快、燃烧安全；

4) 燃料着火温度低，燃尽时间短；

5) 过量空气系数低，烟气量减少；

6)SOx、NOx排放显著减少，NOx排放量较普通燃烧减少2/3以上。

7) 含氧量：30%-85%量体裁衣，根据用户要求设计

2. Product features:

1) High combustion efficiency, energy saving and high thermal efficiency;

2) High flame temperature and strong flame radiation ability;

3) Fast combustion speed and safe combustion;

4) Low ignition temperature and short burnout time of fuel;

5) Excess air coefficient is low and the smoke volume is reduced;

6) SOx and NOx emissions are significantly reduced, and NOx emissions are reduced by more than 2/3 compared with ordinary combustion.

7) Oxygen content: 30%-85%, designed according to user requirements.

1、低压燃油烧嘴原理：

1) 喷嘴的油压在49～894kPa范围内变动，利用燃油本身的油压改变，使供油量变化，与此同时，自动地按一定比例使空气量也相应变化。因此在燃烧能力变化时，能完全自动地保证一定的风油配比，达到完全燃烧，空气过剩量小，可获得良好的燃烧效果，同时提高生产率，节省燃料消耗，消除烟尘，减少氧化烧损。

2) 由于喷嘴本身就能够使油与空气自动配比，成为一个自动调节器，为燃油工业炉燃烧过程的集中控制和自动化创造了有利条件，特别对大型工业炉多喷嘴多段供热的燃油系统，无论手动和自动，均具有群控、自控方便、系统简单、调整容易等突出优点。

1. Burner principle:

1) The oil pressure of the nozzle varies within the range of 49 ~ 894kPa. Adjusting the oil pressure changes the flow of oil and automatically scales the flow of air. When the combustion capacity changes, it can completely automatically ensure a certain proportion of air oil to achieve complete combustion. The minimum excess air can obtain the best combustion effect. At the same time, improve productivity, save fuel consumption, eliminate smoke and dust, reduce oxidation burning loss.

2) The nozzle can be automatically adjusted, which creates favorable conditions for the centralized control and automation of the combustion process of the oil industry furnace. It has the advantages of group control, convenient automatic control, simple system, easy adjustment and so on, especially for the fuel system with multi-nozzle and multi-stage heating of large industrial furnace.

2、应用场合：

1) 广泛运用在各种液体低压工业燃烧炉上，可作为：加热炉烧嘴、退火炉烧嘴、多膛炉、还原炉烧嘴、炉窑烧嘴、烘干机烧嘴、其他高温应用。

2. Applications:

1) Widely used in all kinds of liquid low-pressure industrial combustion furnace, such as: heating furnace burner, annealing furnace burner, multi-chamber furnace, reducing furnace burner, furnace burner, dryer burner and other high temperature applications.

3、产品特点：

1) 能实现冷态电子自动点火；

2) 燃油雾化效果好，燃油雾化颗粒度小，尺寸分布均匀；

3) 燃烧充分、不冒黑烟；

4) 燃烧安全、运行稳定，燃烧效率在99.9％以上；

5) 解决不稳定、结焦堵塞问题，无回火、脱火现象；

6) 火焰长度、锥角及形状可按用户要求设计；

7) 燃烧器安装方式可根据用户需求；

8) 燃油流量：2kg/h-500kg/h(根据用户要求设计)

3. Product features:

1) Realize electronic automatic ignition;

2) Good fuel atomization, small fuel atomization particle size, uniform size distribution;

3) Completely burning without black smoke;

4) Combustion safety, stable operation, combustion efficiency of more than 99.9%;

5) Solve the problems of instability and coking blockage without tempering or defiring;

6) Flame length, cone angle and shape can be designed for user requirements;

7) The burner installation method can be based on user requirements;

8) Fuel flow: 2 kg/h-500 kg/h (designed for user requirements)

1、 应用场合：

1) 高压燃气烧嘴、超高压燃气烧嘴的燃烧，在航空、采油、船舶、实验室、钢铁、化工、轻工、特种生产等各领域均有所应用。高压燃气燃烧器产生的高温高压气流从收敛口高速喷出，其速度为90-380m/s，燃烧室压力范围：0.1-8.0Mpa。

1. Applications:

1) Combustion of high pressure gas and ultra-high pressure gas has been applied in various fields such as aviation, oil recovery, shipbuilding, laboratory, steel, chemical industry, light industry and special production. The high temperature and high pressure flue gas generated by the high pressure gas burner is ejected from the convergence port at a high speed of 90-38 0m/s. The pressure range of the combustion chamber is 0.1-8.0 MPa.

2、 高压烧嘴特点：

1) 燃料与空气混合均匀、燃烧完全，燃烧效率在99.9％以上；

2) 实现低氮氧化物燃烧，NOx排放浓度≤100mg/Nm3

3) 燃烧调节比大（1:5）；

4) 火焰出口速度高、燃烧稳定、不脱火、不回火、不飘火；

5) 每一台高压燃气烧嘴都按照用户要求，量体裁衣设计

2. Product features:

1) Fuel and air are mixed evenly, combustion is complete, combustion efficiency is above 99.9%;

2) Realize low NOx combustion, NOx emission concentration ≤100mg/Nm3

3) Large combustion regulation ratio (1:5);

4) High flame outlet speed and stable combustion;

5) Each high-pressure burner is designed according to customer requirements

1、 应用场合：

1) 高压燃油、超高压燃油的燃烧，在航空、采油、船舶、实验室、钢铁、化工、轻工、特种生产等各领域均有所应用。高压燃油燃烧器产生的高温高压气流从收敛口高速喷出，其速度为90-380m/s，燃烧室压力范围：0.1-8.0Mpa。

1. Applications:

1) Combustion of high pressure fuel and ultra-high pressure fuel has been applied in various fields such as aviation, oil extraction, shipbuilding, laboratory, steel, chemical industry, light industry, special production and so on. The high temperature and high pressure flue gas generated by the high pressure fuel burner is ejected from the convergence port at a high speed of 90-380 m/s, and the pressure range of the combustion chamber is 0.1-8.0 MPa.

2、 高压烧嘴特点：

1) 燃料与空气混合均匀、燃烧完全，燃烧效率在99.9％以上；

2) 燃烧调节比大（1:5）；

3) 火焰出口速度高、燃烧稳定、不脱火、不回火、不飘火；

4) 每一台高压烧嘴都按照用户要求，量体裁衣设计

2. Product features:

1) Fuel and air are mixed evenly, combustion is complete, combustion efficiency is above 99.9%;

2) Large combustion regulation ratio (1:5);

3) High flame outlet speed and stable combustion;

4) Each high-pressure burner is designed according to customer requirements

1、 应用场合：

1) 高速烧嘴产生的高温燃气从收敛口高速喷出，其速度为90-210m/s，已广泛地应用在航空、钢铁、化工、有色冶金、轧钢、轻工等行业的各种加热炉上。

1. Applications:

1) The high temperature gas produced by the high speed burner is ejected from the convergence port at a high speed of 90-210 m/s. It has been widely used in various heating furnaces in aviation, iron and steel, chemical industry, non-ferrous metallurgy, steel rolling, light industry and other industries.

2、 高速低氮烧嘴特点：

1) 燃料与空气混合均匀、燃烧完全，燃烧效率在99.9％以上；

2) 实现低氮氧化物燃烧，NOx排放浓度≤80mg/Nm3

3) 燃烧调节比大（1:6）；

4) 火焰出口速度高、燃烧稳定、不脱火、不回火、不飘火；

5) 每一台高速烧嘴都按照用户要求，量体裁衣设计

2. Product features:

1) Fuel and air are mixed evenly, combustion is complete, combustion efficiency is above 99.9%;

2) Realize low NOx combustion, NOx emission concentration ≤80mg/Nm3

3) Large combustion regulation ratio (1:6);

4) High flame outlet speed and stable combustion;

5) Each high-speed burner is custom-designed according to user requirements

1、 应用场合：

1) 广泛应用于天然气燃烧器、液化石油气燃烧器、高炉煤气燃烧器、焦炉煤气燃烧器、黄磷尾气燃烧器、兰炭尾气燃烧器、氢气燃烧器燃烧场合。

1. Applications:

1) The products are widely used in natural gas, liquefied petroleum gas, blast furnace gas, coke oven gas, yellow phosphorus tail gas, blue carbon tail gas, hydrogen combustion occasions.

2、 燃气烧嘴特点：

1) 燃气与空气混合均匀、燃烧完全，燃烧效率在99.9％以上；

2) 可以采用高能点火器直接点燃，不受气候影响。

3) 不受压力影响、无论正、压还是负压均可实现正常燃烧；

4) 火焰刚性强、燃烧稳定、不脱火、不回火、不飘火；

5) 燃气瞬间发生波动时，燃烧器仍然能正常燃烧，不断火；

6) 燃气压力适应范围大：2KPa—50KPa；

7) 每一台烧嘴都按照用户要求，量体裁衣设计，

8) 工况适应性广：强正压、强负压、无氧、高温等；

9) 实现低氮氧化物燃烧，NOx排放浓度≤50mg/Nm3

2. Product features:

1) The mixture of gas and air is uniform, the combustion is complete, and the combustion efficiency is above 99.9%;

2) Use high-energy igniter for direct ignition, not affected by climate.

3) It is not affected by the furnace pressure and can achieve normal combustion regardless of positive or negative pressure;

4) Strong flame rigidity and stable combustion;

5) When the gas fluctuates instantaneously, the burner can still burn normally;

6) The gas pressure is adaptable to a large range: 2KPa - 50KPa;

7) Each burner is custom-designed according to user requirements.

8) Wide adaptability of working conditions: strong positive pressure, strong negative pressure, no oxygen, high temperature, etc.

9) Realize low NOx combustion, NOx emission concentration ≤50mg/Nm3

1、 应用场合：

1) 应用于各行业领域内沼气的燃烧，常规沼气由50%～80%甲烷、20%～40%二氧化碳及少量氮气、氢气、氧气、硫化氢等气体组成，热值约为20800～23600 KJ/m3。

1. Applications:

1) It is applied to the combustion of biogas in various industries and fields. Conventional biogas is composed of 50% ~ 80% methane, 20% ~ 40% carbon dioxide and a small amount of nitrogen, hydrogen, oxygen, hydrogen sulfide and other gases, with a calorific value of about 20800 ~ 23600 kJ /m3.

2、 沼气低氮烧嘴特点：

1)       沼气与空气混合均匀、燃烧完全，燃烧效率在99.9％以上；

2) 可以采用等离子点火器或高能点火器直接点燃，不受气候影响。

3) 不受压力影响、无论正、压还是负压均可实现正常燃烧；

4) 火焰刚性强、燃烧稳定、不脱火、不回火、不飘火；

5) 燃气瞬间发生波动时，燃烧器仍然能正常燃烧，不断火；

6) 沼气压力适应范围大：2KPa—50KPa；

7) 每一台沼气烧嘴都按照用户要求，量体裁衣设计

8) 工况适应性广：强正压、强负压、无氧、高温等；

9) 实现低氮氧化物燃烧，NOx排放浓度≤50mg/Nm3

2. Product features:

1) Biogas and air are mixed evenly and burned completely, and the combustion efficiency is above 99.9%;

2) Use plasma igniter or high energy igniter for direct ignition, not affected by climate.

3) It is not affected by the furnace pressure and can achieve normal combustion regardless of positive or negative pressure;

4) Strong flame rigidity and stable combustion;

5) When the gas fluctuates instantaneously, the burner can still burn normally;

6) Biogas pressure to adapt to a large range: 2kPa - 50kPa;

7) Each biogas burner is custom-designed according to user requirements

8) Wide adaptability of working conditions: strong positive pressure, strong negative pressure, no oxygen, high temperature, etc.;

9) Realize low NOx combustion, NOx emission concentration ≤50mg/Nm3

1、 应用场合：

1) 可用于燃烧含：二氧化碳、二硫化碳、硫化氢、氟化物、氮氧化物、氯、氯化氢、一氧化碳、烟尘及生产性粉尘等的工业废气，在环保、节能、化工、炉窑、钢铁、有色金属冶炼等行业均有所应用。每一台废气烧嘴都按照现场量体裁衣设计，低热值废气烧嘴。

1. Applications:

1) The equipment can be used to burn industrial waste gas containing: carbon dioxide, carbon disulfide, hydrogen sulfide, fluoride, nitrogen oxide, chlorine, hydrogen chloride, carbon monoxide, smoke and industrial dust. The equipment is widely used in environmental protection, energy saving, chemical industry, furnace, iron and steel, non-ferrous metal smelting and other industries. Each exhaust burner is custom designed.

2、 产品特点：

1) 废气燃烧完全，燃烧效率在99.9％以上；

2) 升温速度快、调节比大（1:10）；

3) 火焰刚性强、燃烧稳定、不脱火、不回火、不飘火；

4) 废气热值、废气压力适应范围大；

5) 火焰长度、锥角及形状可按需设计；

6) 废气烧嘴安装方式可按需设计；

7) 能够与各类炉型配套使用（如焚烧炉、导热油炉、热风炉、加热炉、锅炉等各种工业炉窑）；

2. Product features:

1) The exhaust gas combustion is complete, and the combustion efficiency is above 99.9%;

2) The heating speed is fast and the adjustment ratio is large (1:10);

3) Strong flame rigidity and stable combustion;

4) The burner has a large range of adaptation to the calorific value and exhaust gas pressure of the exhaust gas;

5) The flame length, cone angle and shape can be designed as required;

6) The burner installation mode can be designed according to demand;

7) It can be used with all kinds of furnace types (such as boilers, heat conducting oil furnaces, hot blast furnaces, heating furnaces, incinerators and other industrial furnaces);

1、 应用场合：

1) 广泛应用于钢厂烟道加热、烟气升温、金属表面喷塑喷漆、中草药/食品烘干、纺织印染、化工工艺、木材加工和汽车工业等领域。可实现高炉煤气热风炉、焦炉煤气热风炉、天然气热风炉、转炉煤气热风炉、发生炉煤气热风炉。 

1. Applications:

1) The products are widely used in steel mill flue heating, flue gas heating, metal surface spray painting, Chinese herbal medicine/food drying, textile printing and dyeing, chemical technology, wood processing and automotive industry and other fields. Products include: blast furnace gas hot blast stove, coke oven gas hot blast stove, natural gas hot blast stove, converter gas hot blast stove, producer gas hot blast stove.

2、 产品特点：

1) 燃烧效率高，燃料适应性强；

2) 热损失小、可实现正压及负压下点火

3) 系统调节范围大，正压/负压均可安全运行；

4) 热风炉材质、布置形式可定制；

5) 可实现对热风的温度、流量、压力全自动控制；

6) 可实现各种燃气作为燃料，可以实现低氮燃烧

2. Product features:

1) High combustion efficiency and strong fuel adaptability;

2) Small heat loss, positive and negative pressure ignition

3) Large adjustment range of the system, positive /negative pressure can be safe operation;

4) Material and layout of hot blast stove can be customized;

5) Realize automatic control of temperature, flow and pressure of hot air;

6) Realize all kinds of gas as fuel.

1、 应用场合：

1) 广泛用于焦化、钢铁、冶金企业等需要燃烧焦炉煤气的应用场合，可以与配套的热风炉、烟道内燃烧器、对冲燃烧器、加热炉焦炉煤气烧嘴等使用。每一台低热值焦炉煤气烧嘴都按照现场量体裁衣设计

1. Applications:

1) The products are widely used in coking, iron and steel, metallurgical enterprises and other applications that need to burn coke oven gas. It can be used with hot blast stoves, flue burners, offset burners, heating furnaces and coke oven gas burners. Each low calorific value coke oven gas burner is custom designed

2、 焦炉煤气低氮烧嘴特点：

1) 焦炉煤气气与空气混合均匀、燃烧完全，燃烧效率在99.9％以上；

2) 可以采用等离子点火器或高能点火器直接点燃，不受气候影响。

3) 不受压力影响、无论正、压还是负压均可实现正常燃烧；

4) 火焰刚性强、燃烧稳定、不脱火、不回火、不飘火；

5) 燃气瞬间发生波动时，燃烧器仍然能正常燃烧，不断火；

6) 焦炉煤气气压力适应范围大：2KPa—50KPa；

7) 每一台焦炉煤气烧嘴都按照用户要求，量体裁衣设计

8) 工况适应性广：强正压、强负压、无氧、高温等；

9) 实现低氮氧化物燃烧，NOx排放浓度≤50mg/Nm3

2. Product features:

1) Coke oven gas and air are mixed evenly, combustion is complete, combustion efficiency is above 99.9%;

2) Use plasma igniter or high energy igniter for direct ignition, not affected by climate.

3) It is not affected by the furnace pressure and can achieve normal combustion regardless of positive or negative pressure;

4) Strong flame rigidity and stable combustion;

5) When the gas fluctuates instantaneously, the burner can still burn normally;

6) Coke oven gas pressure to adapt to a large range: 2KPa - 50KPa;

7) Each coke oven gas burner is designed according to customer requirements

8) Wide adaptability of working conditions: strong positive pressure, strong negative pressure, no oxygen, high temperature, etc.

9) Realize low NOx combustion, NOx emission concentration ≤50mg/Nm3

1、 应用场合：

1)  广泛用于钢铁、冶金企业等需要燃烧高炉煤气的应用场合，可以与配套的热风炉、烟道内燃烧器、对冲燃烧器、加热炉高炉煤气烧嘴等使用。每一台低热值高炉煤气烧嘴都按照现场量体裁衣设计。

1. Applications:

1) The products are widely used in iron and steel, metallurgical enterprises and other applications that need to burn blast furnace gas. It can be used with hot blast stoves, flue burners, offset burners, furnace gas burners, etc. Each low calorific value blast furnace gas burner is custom designed.

2、 高炉煤气低氮烧嘴特点：

1) 高炉煤气与空气混合均匀、燃烧完全，燃烧效率在99.9％以上；

2) 可以采用等离子点火器直接点燃，不受气候影响。

3) 不受压力影响、无论正压还是负压均可实现正常燃烧；

4) 火焰刚性强、燃烧稳定、不脱火、不回火、不飘火；

5) 燃气瞬间发生波动时，燃烧器仍然能正常燃烧，不断火；

6) 高炉煤气压力适应范围大：2KPa—50KPa；

7) 每一台高炉煤气烧嘴都按照用户要求，量体裁衣设计

8) 工况适应性广：强正压、强负压、无氧、高温等；

9) 实现低氮氧化物燃烧，NOx排放浓度≤30mg/Nm3

2. Product features:

1) The blast furnace gas and air are mixed evenly and burned completely, with the combustion efficiency above 99.9%;

2) Adopt plasma igniter for direct ignition, which is not affected by climate.

3) The product is not affected by furnace pressure. No matter positive pressure or negative pressure, the product can be normal combustion;

4) Strong flame rigidity and stable combustion.

5) When the gas fluctuates instantaneously, the burner can still burn normally;

6) Blast furnace gas pressure to adapt to a large range: 2KPa - 50KPa;

7) Each burner is custom-designed according to user requirements

8) Wide adaptability of working conditions: strong positive pressure, strong negative pressure, no oxygen, high temperature, etc.;

9) Realize low NOx combustion, NOx emission concentration ≤30mg/Nm3

1、原理：

1) 对冲煤气燃烧器包括固定在烟道内壁的烧嘴，烧嘴朝向烟气流动的方向设置，烧嘴的端口连接有一稳燃室，稳燃室的出焰口朝向背离烧嘴的方向设置。有效减少了外部环境对烧嘴火焰的影响，火焰通过稳燃器高速射流进入到烟道内，从而更加高效的对CO充分燃烧。而且由于烧嘴设置在烟道内壁，减少了外置式烧嘴设置的空间占用。

1. Principle:

1) The offset gas burner comprises a burner fixed on the inner wall of the flue. The burner is arranged toward the direction of the flue gas flow. The end of the burner is connected with a steady combustion chamber, and the outlet of the steady combustion chamber is directed away from the burner. This effectively reduces the impact of the external environment on the burner flame, the flame enters the flue through the high-speed jet of the stabilizer, and the full combustion of CO is more efficient. Burners are arranged in the inner wall of the flue, which reduces the space occupied by external burners.

2、应用场合：

1)  对吹烧嘴可用于：高炉煤气对吹烧嘴、转炉煤气对吹烧嘴、焦炉煤气对吹烧嘴、天然气对吹烧嘴等非标气体，实现烟道内燃烧，在钢铁、焦化、有色金属冶炼、冶金等行业广泛应用。

2. Applications:

1) The offset gas burner can be used for the combustion of blast furnace gas, converter gas, coke oven gas, natural gas and other non-standard gases, to achieve combustion in the flue, which is widely used in iron and steel, coking, non-ferrous metal smelting, metallurgy and other industries.

3、产品特点：

1)实现烟道内对冲火焰燃烧，燃烧完全，燃烧效率在99.9％以上；

2)实现烟气内CO的燃尽，节能5%~20%；

3)升温速度快、调节比大；

4)火焰刚性强、燃烧稳定、不脱火、不回火、不飘火；

5)火焰长度、锥角及形状可按需设计；

6)在系统负压：1kpa-9kpa下稳定运行

7)燃气流量：100Nm3/h-50000Nm3/h（根据用户要求设计）

3. Product features:

1) Realize the offset flame combustion in the flue, complete combustion, combustion efficiency up to 99.9%;

2) Realize the combustion of CO in the flue gas, energy saving 5%~20%;

3) Fast heating speed and large regulation ratio;

4) Strong flame rigidity, stable combustion;

5) The flame length, cone angle and shape can be designed as required;

6) Stable operation under the negative pressure of 1 kpa - 9 kpa

7) Gas flow: 100 Nm3/h-50000 Nm3/h (designed for user requirements)

1、应用场合：

1) 广泛应用于钢铁、冶金、石油化工等相关领域。

1. Applications:

1) Widely used in iron and steel, metallurgy, petrochemical and other related fields.

2、产品特点：

1) 工业煤气与空气混合均匀、燃烧完全，燃烧效率在99.9％以上，NOx排放浓度≤100mg/Nm3；

2) 定制化设计外置式燃烧系统和烟道内置式燃烧系统；

3) 升温速度快、调节比大（1:6），火焰刚性强、燃烧稳定；

4) 火焰长度、锥角及形状可按需设计；

5) 能与各类窑炉配套使用（如：退火炉、导热油炉、热风炉、加热炉等各种工业炉窑）。

2. Product features:

1) Industrial gas and air are mixed evenly and burned completely. Combustion efficiency is higher than 99.9% with low NOx emission;

2) Customized design of external combustion system and flue built-in combustion system;

3) Fast heating speed, large adjustment ratio (1:6), rigid flame and stable combustion;

4) Flame length, cone angle and flame shape can be designed as needed;

5) Perfectly used with all kinds of furnaces (such as boilers, heat conducting oil furnaces, hot air furnaces, heating furnaces and other industrial furnaces).